A conductivity tester has to be rugged.  A conductivity test has to be accurate.  And a conductivity tester has to just work, over and over. 

Jenco EC330 is an easy to use conductivity tester that does all that and more.  In addition to measuring two conductivity ranges, EC330 also measures TDS and temperature.  Protected by an IP67 rated case, you can immersed the EC330 in water during measuring or cleaning.  Precision manufacturing of the conductive cell and an advanced microprocessor gives EC330 an accuracy of ±1 %, making it one of the most accurate conductivity and TDS instruments on the market today.  To take consistently accurate readings simply calibrate the tester, dip and read.  

Advanced features combined with tester usability

Jenco has packed features normally reserved for higher-end meters into the EC330.  At the center of the EC330 is a microprocessor that controls advanced features such as 1 or 2 point calibration, automatic determination of optimal reading range and replaceable conductivity cell.

• Dual display: Simultaneous display of conductivity and temperature, or TDS and temperature
• 1 or 2 point calibration: EC330 can be calibrated at 1 point, or at 2 points for improved accuracy
• Selectable or auto ranging: Manually select your conductivity or TDS range and resolution, or let the tester determine the optimal range and resolution
• Replaceable conductivity cell: conductivity cell can be replaced to ensure extended usefulness
• Six selectable units of measure: uS/cm, mS/cm, mg/L, g/L, °C, °F
• Improved usability: Data hold, automatic temperature compensation and low battery indicator

Rugged reliablity

Jenco VisionPlus EC330 is protected from the elements by an IP67 rated case that is dust-proof and water-proof up to 1 meter.

Responsible manufacturing

Jenco express its dedication to water quality with the way it manufactures products.  Jenco EC330 is RoHS compliant, which means all units are made without the use of hazardous materials such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ether. All Jenco products are made in its ISO 9001 certified manufacturing facility.

Specifications

General

• Temp compensation: Automatic from 0.0 to 60.0 °C 
• Temp coefficient: 1.91% / °C 
• Reference temp: 25 °C 
• TDS constant: 0.50 
• Calibration: 1 or 2 point (1415uS at 0~1999uS/cm range; 12.90mS at 0~19.99mS/cm range) 
• Electrode type / cell constant: Two wire conductivity cell / 1.0 
• Temp sensor: Thermistor, 10k ohms, at 25 °C 
• Temp unit: °C and °F 
• Display: LCD 
• Power: LR44 x 4 batteries
• Battery life: >100 hours
• Auto power off: After 10 minutes of inactivity 
• Case: IP-67 dust-proof and water-proof up to 1 meter 
• Weight: 105 grams (Including batteries) 
• Dimensions (W x D x H): 19.3cm x 4.4cm x 2.5cm