The flat surface is beneficial because it does not collect suspended solids, and its self-cleaning ability by the flow of the process over the electrode provides a clean electrode surface.The reference is gel-filled and requires no pressurization.The annular reference junction is of special design, allowing operation in processes that would normally foul a standard combination electrode reference.The electrodes are compatible with nearly all available pH and ORP instrumentation. They may be ordered with an optional integral temp. compensator.(Refer to temp. compensator selection chart.)The electrode housing is a ¾” MNPT fitting. Probe insertion is 2” from the threaded end, ¾” diameter with standard pressure up to 100 PSI.

Features

• Fast Response
• Flat Sensing Surface
• Sealed Gel- Filled Reference
• Large Annular Porous Polyethylene Ref. Junction
• Compatible with Most pHAnalyzers

Specifications

• Body Material: CPVC
• Sensor Material: Platinum
• ATC Sensor: Pt-100
• Temperature Range: 0° to 80°C
• Reference: Double Junction
• Connector: Tinned Leads
• Cable Length: 20 ft.