Product Description
ATC is a 10k thermistor. Power is 115/230V AC or by battery. Accessories such as electrodes and calibration buffers and solutions are sold separately.
Features
- Clear, Large LCD Display (4 1/8 X 3 1/16 In.)
- Clear LCD Displays D.O. As Percent Air Saturation Or D.O. As Parts Per Thousand, Simultaneously With Temperature
- Manual Or Automatic Temperature Compensated (ATC) D.O. Readings
- User Selectable Salinity And Pressure Compensated D.O. Readings
- Works With ACcurate And Reliable Polarographic D.O. Probes
- Convenient One Point Calibration For D.O. Calibration Data Is Stored In Memory And Is Ready For Use On Power Up
- Automatic Lock Mode And End Point Sensing Are Available To Lock In Stable Readings
- Intuitive Operation With Membrane Keypad With Tactile And Audio Feedback
- Splash Resistant Case Is mAde With Durable, Reinforced Plastic For Added Protection. Protective Covers For Connectors Are Included
- Large LCD Is Offset For Improved Protection Against Unintentional Damage
- Smaller Case Does Not Clutter Valuable Desk Space
- 8 Pin DIN Connector For D.O. And Thermistor
- AC Adaptor Or Battery Power
- RS-232 Output
Specifications
Primary Specs| Range | Resolution | Accuracy | |
| D.O. (ppm/air saturated) | 0.00 to 20.00 ppm / 0.0 to 200.0 % | 0.01 ppm / 0.1 % | ± 0.2 % of span |
| Temp | - 6.0 to 50.0 °C | 0.1 °C | ± 0.3 ° C |
Dissolved Oxygen
- Salinity Compensation: Manual 0.0 to 40.0 ppt
- Pressure Compensation: Manual 600 to 1100 mBar
- Temperature Compensation: Auto -10.0 to 50.0 °C
- Sensor Type: Thermistor 10k ohm at 25 °C
- Power Supply: Six 1.5 V Batteries or 115/230 V AC adapter
- Relative Humidity: Up to 95 %
- Calibration Backup: Yes
- Calibration Backup: EEPROM
- Audio Feedback: All Touch Keys
- End Point Sensing & Hold: Yes
- LCD Character Size (Main, Temp): 21 mm, 16 mm high LCD
- Ambient Temp. Range: 0 to 50 ° C
- RS-232 communication Yes, Baud Rate 9600
- Dimensions (W x D x H ): 165 mm x 230 mm x 80 mm
- Weight: 650 grams (Excluding batteries)
- Sensor Type: Thermistor 10k ohm at 25 °C
- Power Supply: Six 1.5 V Batteries or 115/230 V AC adapter
- Relative Humidity: Up to 95 %
- Calibration Backup: Yes
- Calibration Backup: EEPROM
- Audio Feedback: All Touch Keys
- End Point Sensing & Hold: Yes
- LCD Character Size (Main, Temp): 21 mm, 16 mm high LCD
- Ambient Temp. Range: 0 to 50 °C
- RS-232 communication Yes, Baud Rate 9600
- Dimensions (W x D x H ): 165 mm x 230 mm x 80 mm
- Weight: 650 grams (Excluding batteries)
- Power Supply: Six 1.5 V Batteries or 115/230 V AC adapter
- Relative Humidity: Up to 95 %
- Calibration Backup: Yes
- Calibration Backup: EEPROM
- Audio Feedback: All Touch Keys
- End Point Sensing & Hold: Yes
- LCD Character Size (Main, Temp): 21 mm, 16 mm high LCD
- Ambient Temp. Range: 0 to 50 °C
- RS-232 communication Yes, Baud Rate 9600
- Dimensions (W x D x H ): 165 mm x 230 mm x 80 mm
- Weight: 650 grams (Excluding batteries)
Additional Information
| SKU | 9173R |
|---|---|
| Display Type | LCD |
| CE Approved | Yes |
| Shipping weight | 5.0000 |
Recently Viewed Products
Jenco 101 conductivity electrode epoxy / carbon body, k=1.0 with 8-pin connector
Jenco 3101CC-01 conductivity cell, k=1.0, epoxy carbon, 3 ft cable, tinned leads
Conductivity standard solution for k=1 cell constant, 16 oz bottle 1000 us/cm
Jenco 671 pH / mV / temp. benchtop meter with voltage recorder & Karl Fisher output
Jenco LD-900-7-DO dissolved oxygen electrode, lab epoxy, 8-pin w/ 1-meter cable
You have no items in your shopping cart.
You have no items to compare.
Check items to add to the cart or select all
-
Jenco LD-900-7-DO dissolved oxygen electrode, lab epoxy, 8-pin w/ 1-meter cable
Add to WishlistRegular Price:
Special Price:
-
Add to WishlistRegular Price:
Special Price:
-
-
Jenco 008 simple electrode holder, base clamp & rod type
Add to WishlistRegular Price:
Special Price:
-
Jenco LD-900-3a: membrane cap kit for use with dissolved oxygen probe
Add to WishlistRegular Price:
Special Price:
-
-
