Home /
Jenco 6309PDT 1/4 DIN pH & d.o. analyzer

Jenco 6309PDT 1/4 DIN pH & d.o. analyzer

Availability: In stock

Regular Price: $649.00

Special Price: $584.10

Qty:

Quick Overview

pH & D.O. analyzer, 1/4 DIN panel mount IP-65 case, polarographic sensor with replaceable membranes and programmable pressure and salinity compensation. Features 2 pH and 2 D.O. fully programmable relays and one for temp.. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors.

Jenco 6309PDT 1/4 DIN pH & d.o. analyzer

Double click on above image to view full picture

Product Description

CE Approved. Accessories such as electrodes and calibration buffers and solutions are sold separately.

Features

High 50/60 Hz Noise Rejection
Power Down Memory Backup
Auto Tempe. Compensation
Bumpless Calibration
RS-485 Output
Membrane Switch With Audio Feedback
Displays pH Electrode Efficiency
Two User Programmable Relays For pH and Two For D.O.
Simultaneous Analysis And Display For Measurement And Control
pH/Temperature Measurement & Control
Reversible And Isolated 4 To 20mA Output
One Programmable Relay Output For Temperature
Graphic LCD Display, 128 X 64 With Backlight
Pipe, Wall Or Panel Mounting Watertight 1/4 DIN Enclosure
Selectable Linear Or Anti-Logarithmic pH Output

Specifications

Primary Specs

	Range	Resolution	Accuracy
pH	-2.00 to 16.00	0.01pH	0.1% ± 1 LSD
Dissolved Oxygen (ppm)	0.0 to 60.00 ppm	0.01 ppm	± 0.2% of span
Dissolved Oxygen (% )	0 to 500.0%	0.1 %	± 0.2% of span
Temp.	-10.0 to 120°C	0.1°C	± 0.1°C

pH Temperature Compensation Range: -10.0 to 120.0°C
pH Buffer Recognition: 4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
pH Buffer Temperature Range: 0 to 60.0 °C
pH Electrode Slope Compensation: ±30% of Ideal Slope
pH electrode Offset Compensation: ±100 mV
Input Impedance: Greater than 10 exp(13) Ohms
Calibration Auto End Point Sensing: Yes

Dissolved Oxygen

Salinity Compensation: 0.0 to 40.0 ppt
Pressure Compensation: 600 to 1100mBar

Output Relays

Relays: One Programmable Relay for Temperature, Two Programmable Relays for pH and Two Programmable Relays for D.O.
Control type: On/off
Relay output ( resistive load only ): 5A at 115V or 2.5A at 230V
Set point hysteresis: User programable

Current Output