Product Description
The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temp. and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC. Accessories such as electrodes and calibration buffers and solutions are sold separately.
Features
- Bumpless Calibration
- CE Approved
- RS-485 Output
- Programmable Relays For Conductivity
- Reversible And Isolated 4 To 20mA Output
- Programmable Relay For Temperature
- Conductivity/Temp.Measurement & Control
- Simultaneous Analysis And Display For Measurement And Controls
- User Programmable Reference Temperature Temperature Coefficient
- Selectable 2-Wire Or 4-Wire Cells For Long Cable Length & Wide Measurement Range
Specifications
Primary Specs| Range/Resolution/Accuracy | |
| Conductivity, K=0.1 |
0.000 to 9.999 uS/cm 0.001 uS/cm ± 0.5 % ± 1 LSD 10.00 to 99.99 uS/cm 0.01 uS/cm ± 0.5 % ± 1 LSD 100.0 to 300.0 uS/cm 0.1 uS/cm ± 0.5 % ± 1 LSD |
| Conductivity, K=1 |
100.0 to 999.9 uS/cm 0.1 uS/cm ± 0.5 % ± 1 LSD 1.000 to 9.999 mS/cm 0.001 mS/cm ± 0.5 % ± 1 LSD 10.00 to 30.00 mS/cm 0.01 mS/cm ± 0.5 % ± 1 LSD |
| Conductivity, K=10 |
1.000 to 9.999 mS/cm 0.001 mS/cm ± 0.5 % ± 1 LSD 10.00 to 99.99 mS/cm 0.01 mS/cm ± 0.5 % ± 1 LSD 100.0 to 300.0 mS/cm 0.1 mS/cm ± 0.5 % ± 1 LSD |
| TDS, K=0.1 |
0.000 to 5.000 ppm 0.001 ppm ± 0.5 % ± 1 LSD 5.000 to 50.00 ppm 0.01 ppm ± 0.5 % ± 1 LSD 50.00 to 150.0 ppm 0.1 ppm ± 0.5 % ± 1 LSD |
| TDS, K=1 |
50.00 to 500.0 ppm 0.1 ppm ± 0.5 % ± 1 LSD 0.500 to 5.000 ppt 0.001 ppt ± 0.5 % ± 1 LSD 5.000 to 15.00 ppt 0.01 ppt ± 0.5 % ± 1 LSD |
| TDS, K=10 |
0.500 to 5.000 ppt 0.001 ppt ± 0.5 % ± 1 LSD 5.000 to 50.00 ppt 0.01 ppt ± 0.5 % ± 1 LSD 50.00 to 150.0 ppt 0.1 ppt ± 0.5 % ± 1 LSD |
| Temp | -10.0 to 120.0 °C 0.1 °C ± 0.3 °C |
Conductivity
- Reference Temperature: 10 °C to 29.0 ° C
- Temperature Coefficient: 0.0 % to 4.99 %
- Basic Cell Constant: 0.01,1 and 10.0
- Cell Constant Range: ±30% of Basic Cell Constant
- Output Relays numbers: Two Programmable High or Low Relays for Conductiviy
- Control Type: On/Off
- Relay Output (Resistive Load Only): 5 Amps at 115 VAC, 2.5 Amps at 230 VAC
- Relay Set Point Hysteresis: User Programmable
- Current Output: Isolated 4 to 20 mA
- Range: Selectable Zero, & Span
- Accuracy: ± 0.02mA
- Isolated Voltage: 500 VDC
- Maximum Load: 500 Ohms
- ATC Sensor: Thermistor 10KiloOhms at 25 °C
- Security Protection: 4 digit password
- Keypad: Audio feedbackup
- Communication: RS-485
- Display: Graphic LCD w/Backlight
- Power source: 115/230 VAC ,50/60Hz
- Dimensions: 1/4 DIN ,Depth 148 mm
- Weight: 950 gm
Additional Information
| SKU | 6308CT |
|---|---|
| Bundle | Meter only |
| Display Type | LCD |
| Outputs | 4-20 mA current output |
| Relays | 3 on/off |
| PC Interface | RS-485 |
| CE Approved | Yes |
| Shipping weight | 4.0000 |
Recently Viewed Products
Jenco 6001C: extension electrode's cable, 4-pin to 4-pin, 3-ft
Jenco JE175P: spear tip pH probe, BNC & 3-ft cable, temp to 60°C
Jenco 9250M DO / temp. portable meter with data storage & RS-232
Jenco 6309POT 1/4 DIN pH / ORP / temp. multi-parameter analyzer
Jenco 6005C: electrode's cable, BNC & 8-pin DIN to 4-pin, 3-ft
You have no items in your shopping cart.
You have no items to compare.
Check items to add to the cart or select all
-
Jenco 392-123: conductivity electrode, k=10, 0 ms to 300 ms, 3/4" NPT in-line
Add to WishlistRegular Price:
Special Price:
-
