Product Description
Features
- CE Approved
- RS-232C Output
- Power Down Backup
- Splash Resistant/Watertight Case
- Battery/AC Adaptor
- High 50/60Hz Noise Rejection
- High Resolution ,4 1/2 Digit Readout
- Highly Reliable Mechanical Touch Keys With Audio Feedback
- Programmable Resolution To 0.001/0.1 pH,1/0.1 mV
- Direct Readout In Ion Concentration (Calibration Units Conform To That Of The Calibration Standard Solutions)
Specifications
Primary Specs| Range | Resolution | Accuracy | |
| pH | -2.00~16.00 pH | 0.01 pH or0.001pH(selectable) | ± 0.1% ± 1 digit |
| mV | -1999~1999 mV | 1 mV or 0.1mV(selectable) | ± 0.1% ± 1 digit |
| Ion | 0.00~25.00 conc. | 0.05 conc. | ± 2 LSD |
| Ion | 25.0~50.0 conc. | 0.1 conc. | ± 2 LSD |
| Ion | 50.0~119.8 conc. | 0.2 conc. | ± 2 LSD |
| Temp. | -5.0~125.0 ° C | 0.1°C | ± 0.5 °C |
General
- pH buffer recognition model: 6250 - pH 7.00,4.01,10.01
- 6250C - pH 6.86,4.00,
- pH standardization: Dual point standardization
- Ion standardization: Single or dual point standardization
- pH temp. compensation: Auto/manual -5.0 to 125.0°C
- pH buffer temp. range: 0 to 50.0°C
- pH electrode offset recognition: ± 90 mV at pH 7.00 or 6.86
- pH electrode slope recognition: ±30% at pH4.00,9.18 or10.01
- Input Impedance: Greater than 1012 Ohms
- ATC probe: Thermister,10 kilo Ohms at 25°C
- Communication: RS-232C output
- Audio feedback: All touch keys
- Display ph/me/temp: 15mm/7.5mm high LCD
- Ambient temp. range: 0 to 50.0°C
- Power supply: battery/adaptor: 6 AAA batteries/AC adaptor
- Power backup: Memeory backup
- Battery life (alkaline): 25 hours or so
- Dimensions: 83mm X 241mm X71mm
- Weight: 450gms (batteries included)
Additional Information
| SKU | 6250 |
|---|---|
| Bundle | Meter only |
| Display Type | LCD |
| PC Interface | RS-232 |
| Shipping weight | 4.0000 |
You may also be interested in the following product(s)
Jenco Vision Plus pH6810 pH / mV / temp water-proof meter |
You have no items in your shopping cart.
You have no items to compare.
Check items to add to the cart or select all
-
Jenco 600E-ORP general purpose ORP electrode, BNC connector, 3 ft cable, max. temp 60°C
Add to WishlistRegular Price:
Special Price:
-
Jenco 600P general purpose pH electrode, BNC connector, 3 ft cable, max. temp 60°C
Add to WishlistRegular Price:
Special Price:
-
-
Jenco 6230A-ST: ATC probe, stainless steel, 10k ATC, 3 ft cable with 8-pin DIN connector
Add to WishlistRegular Price:
Special Price:
-
-
Jenco 008 simple electrode holder, base clamp & rod type
Add to WishlistRegular Price:
Special Price:
-
Jenco 6B7: buffer capsule pH 7.00, 10 capsules per pack
Add to WishlistRegular Price:
Special Price:
-
