Product Description
Features a voltage/recorder output and an internal pH/ORP select switch. Display is a large bright red LED. Connectors are a BNC input and spade lug screw type connector block. Meter requires a Pt-100 ATC or a simulation resistor for temp.. Power115/230A AC. Product includes the meter only and accessories such as electrodes and calibration buffers and solutions are sold separately.
Features
- All Solid State Design
- Low Cost
- Easy To Install
- Set Points On Front Panel
- Recorder Output
- 0.56 High Efficiency Red LED Display
- 1/8 DIN Aluminum Case
- Set Points Cover Entire Span
- ATC For pH 0 To 100 °C
- Internal pH/Orp Select Switch
- Low Power Consumption Design, Reduced Internal Heating Thus Increased Reliability
Specifications
Primary Specs| Range | Resolution | Accuracy | |
| pH | 0~14.0 | 0.1 | 0.1 ± 1digit |
| ORP | -1990~1990 mV | 10 | ± 0.1% ± 1 digit |
| Temp. | 0 ~ 100 ° C | 1 | 1 ± 1 digit |
General
- Input impedance: Greater than 10^12 Ohm
- Temp. compensation: Auto 0 to 100 °C
- Recorder output (pH): 1400mV
- Recorder output (mV): -1990 to 1990mV
- Recorder output (Temp.): 1000mV
- Dual point On/Off control: pH or ORP with internal select switch
- Dead band: ± 0.1 pH for each set point
- Relay output: 8 A at 115VAC,4A at 230VAC
- Readout: 0.56 high efficiency red LED display
- Power source: 115 VAC/230VAC ¡À 15%,50/60Hz
- Dimension: 96mm x48mm x 172mm
- Weight: 0.69 kg
Additional Information
| SKU | 3671N |
|---|---|
| Bundle | Meter only |
| Display Type | LED |
| Relays | 2 on/off |
| Shipping weight | 3.0000 |
You may also be interested in the following product(s)
Jenco Vision Plus pH6810 pH / mV / temp water-proof meter |
Recently Viewed Products
You have no items in your shopping cart.
You have no items to compare.
Check items to add to the cart or select all
-
Jenco ORPF-020B self-cleaning flat surface combination ORP sensor, 20 ft cable, BNC connector
Add to WishlistRegular Price:
Special Price:
-
Add to WishlistRegular Price:
Special Price:
